Time-Lapse Resistivity Monitoring of a Simulated Runoff Test in a Bioswale, Philadelphia

As part of the reconstruction of Interstate-95 in Philadelphia, a series of vegetated stormwater infiltration basins (bioswales) have been installed to manage highway runoff. To assess these bioswales, we used simulated runoff tests (SRTs), where the bioswale is flooded from a fire hydrant to simulate a major storm event. SRT monitoring relies on point measurements of inflow, outflow, and soil moisture to determine the volume of stormwater the bioswale can handle and the time to recovery. To provide better spatial coverage for site assessment, we tested the use of time-lapse electrical resistivity tomography (ERT) during a SRT. Using an onsite geophysical monitoring station, we performed ERT surveys every 4 h before, during, and after the SRT test. Inflow and outflow measurements taken during the SRT found that a majority of the water did not exit the bioswale via the outlet box. The time-lapse inversion results indicated that runoff uniformly spread throughout the basin before infiltrating into the heterogeneous urban soil below. The ERT demonstrated that the underlying native soil contributed to the overall performance of the bioswale, a contribution which was previously assumed to be minimal. Recovery to pretest soil moisture levels took roughly 2-3 days, according to both soil moisture sensors and time-lapse geophysical data. The SRT results were consistent with natural storm events recorded by our geophysical monitoring station, which have been monitored continuously for over a year. Use of ERT during SRTs characterize the pattern of infiltration and recovery rate of the soil beneath a stormwater control. Additionally, the heterogeneous infiltration observed during the SRT suggested that ERT surveys preconstruction may improve future planning of stormwater controls by guiding the location of infiltration measurements.