Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites

Herein, we proposed a novel laser assisted additive manufacturing (AM) methodology that utilizes prepreg composites (glass fiber-polypropylene) with continuous fiber reinforcement to fabricate 3D objects by implementing laser assisted bonding and laser cutting. The microstructure analysis demonstrated no visible void content and excellent interfacial bonding. The bonding strength of the proposed method was evaluated through lap shear strength and peel strength testing and 50% higher peel strength than hot compaction method, while lap shear strength was up to 96% of compression molding benchmark data. Tensile properties of components printed by our method were superior to those of fused deposition modeling (FDM) printed short fiber composites with 300% and 150% of increase in tensile strength and modulus, respectively. Tensile strength of our printed components was comparable to compression molding and stamping, however, tensile modulus was 50% lower in average. Flexural strength of the laser assisted AM parts was also in the range of stamping and compression molding methods, and flexural modulus was up to 100% higher than these methods. Overall, our proposed new technique offers an alternative direction in AM of continuous fiber reinforced thermoplastic polymer composites to solve the issues associated with current techniques.