Higher order plasma-based tunable absorber using magneto-dielectric substrates

Komlan Payne; Jay K. Lee; Kevin Xu; Jun H. Choi

doi:10.1109/APUSNCURSINRSM.2019.8889341

Higher order plasma-based tunable absorber using magneto-dielectric substrates

Komlan Payne
, Jay K. Lee
, Kevin Xu
, Jun H. Choi

Department of Electrical Engineering

Syracuse University
SUNY Buffalo

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Abstract

This paper presents a multilayer absorber based on the technique previously developed for the design of a thickness customizable high-order bandpass frequency selective surface (FSS). Lossy substrates are used to absorb the electromagnetic energy in the FSS backed by a ground plane. Such technique allows simple integration of the tuning elements, while simultaneously providing the design option to realize the absorber with specific/desired thicknesses. The lossy substrates are perforated to host discrete electrically tunable ceramic gas-encapsulating chambers (plasma-shells). These plasma-shells enable dynamic control of the absorption spectral band. To demonstrate the design flexibility and performance, a second order frequency selective absorber operating at the C-band (center frequency at f₀ = 6 GHz with 17% fractional bandwidth) is designed with different thickness configurations. Then the plasma-shells are strategically integrated in the design in order to control the location of both absorption resonant frequencies by applying different plasma frequencies. Full-wave electromagnetic simulations are carried out to validate the proposed concepts.

Original language	English
Title of host publication	2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	2027-2028
Number of pages	2
ISBN (Electronic)	9781728106922
DOIs	https://doi.org/10.1109/APUSNCURSINRSM.2019.8889341
State	Published - Jul 2019
Event	2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Atlanta, United States Duration: Jul 7 2019 → Jul 12 2019

Publication series

Name	2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings

Conference

Conference	2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019
Country/Territory	United States
City	Atlanta
Period	07/7/19 → 07/12/19

Keywords

Circuit analog absorber
Lossy frequency selective surfaces
Radar cross section
RF plasma discharge
Tunable absorber

Access to Document

10.1109/APUSNCURSINRSM.2019.8889341

Cite this

Payne, K., Lee, J. K., Xu, K., & Choi, J. H. (2019). Higher order plasma-based tunable absorber using magneto-dielectric substrates. In 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings (pp. 2027-2028). Article 8889341 (2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/APUSNCURSINRSM.2019.8889341

Payne, Komlan ; Lee, Jay K. ; Xu, Kevin et al. / Higher order plasma-based tunable absorber using magneto-dielectric substrates. 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2019. pp. 2027-2028 (2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings).

@inproceedings{f4150c7ce2624ac9a9745b5b3196589d,

title = "Higher order plasma-based tunable absorber using magneto-dielectric substrates",

abstract = "This paper presents a multilayer absorber based on the technique previously developed for the design of a thickness customizable high-order bandpass frequency selective surface (FSS). Lossy substrates are used to absorb the electromagnetic energy in the FSS backed by a ground plane. Such technique allows simple integration of the tuning elements, while simultaneously providing the design option to realize the absorber with specific/desired thicknesses. The lossy substrates are perforated to host discrete electrically tunable ceramic gas-encapsulating chambers (plasma-shells). These plasma-shells enable dynamic control of the absorption spectral band. To demonstrate the design flexibility and performance, a second order frequency selective absorber operating at the C-band (center frequency at f0 = 6 GHz with 17\% fractional bandwidth) is designed with different thickness configurations. Then the plasma-shells are strategically integrated in the design in order to control the location of both absorption resonant frequencies by applying different plasma frequencies. Full-wave electromagnetic simulations are carried out to validate the proposed concepts.",

keywords = "Circuit analog absorber, Lossy frequency selective surfaces, Radar cross section, RF plasma discharge, Tunable absorber",

author = "Komlan Payne and Lee, \{Jay K.\} and Kevin Xu and Choi, \{Jun H.\}",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 ; Conference date: 07-07-2019 Through 12-07-2019",

year = "2019",

month = jul,

doi = "10.1109/APUSNCURSINRSM.2019.8889341",

language = "English",

series = "2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "2027--2028",

booktitle = "2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings",

address = "United States",

}

Payne, K, Lee, JK, Xu, K & Choi, JH 2019, Higher order plasma-based tunable absorber using magneto-dielectric substrates. in 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings., 8889341, 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings, Institute of Electrical and Electronics Engineers Inc., pp. 2027-2028, 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019, Atlanta, United States, 07/7/19. https://doi.org/10.1109/APUSNCURSINRSM.2019.8889341

Higher order plasma-based tunable absorber using magneto-dielectric substrates. / Payne, Komlan; Lee, Jay K.; Xu, Kevin et al.
2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2019. p. 2027-2028 8889341 (2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Higher order plasma-based tunable absorber using magneto-dielectric substrates

AU - Payne, Komlan

AU - Lee, Jay K.

AU - Xu, Kevin

AU - Choi, Jun H.

PY - 2019/7

Y1 - 2019/7

N2 - This paper presents a multilayer absorber based on the technique previously developed for the design of a thickness customizable high-order bandpass frequency selective surface (FSS). Lossy substrates are used to absorb the electromagnetic energy in the FSS backed by a ground plane. Such technique allows simple integration of the tuning elements, while simultaneously providing the design option to realize the absorber with specific/desired thicknesses. The lossy substrates are perforated to host discrete electrically tunable ceramic gas-encapsulating chambers (plasma-shells). These plasma-shells enable dynamic control of the absorption spectral band. To demonstrate the design flexibility and performance, a second order frequency selective absorber operating at the C-band (center frequency at f0 = 6 GHz with 17% fractional bandwidth) is designed with different thickness configurations. Then the plasma-shells are strategically integrated in the design in order to control the location of both absorption resonant frequencies by applying different plasma frequencies. Full-wave electromagnetic simulations are carried out to validate the proposed concepts.

AB - This paper presents a multilayer absorber based on the technique previously developed for the design of a thickness customizable high-order bandpass frequency selective surface (FSS). Lossy substrates are used to absorb the electromagnetic energy in the FSS backed by a ground plane. Such technique allows simple integration of the tuning elements, while simultaneously providing the design option to realize the absorber with specific/desired thicknesses. The lossy substrates are perforated to host discrete electrically tunable ceramic gas-encapsulating chambers (plasma-shells). These plasma-shells enable dynamic control of the absorption spectral band. To demonstrate the design flexibility and performance, a second order frequency selective absorber operating at the C-band (center frequency at f0 = 6 GHz with 17% fractional bandwidth) is designed with different thickness configurations. Then the plasma-shells are strategically integrated in the design in order to control the location of both absorption resonant frequencies by applying different plasma frequencies. Full-wave electromagnetic simulations are carried out to validate the proposed concepts.

KW - Circuit analog absorber

KW - Lossy frequency selective surfaces

KW - Radar cross section

KW - RF plasma discharge

KW - Tunable absorber

UR - https://www.scopus.com/pages/publications/85075244141

U2 - 10.1109/APUSNCURSINRSM.2019.8889341

DO - 10.1109/APUSNCURSINRSM.2019.8889341

M3 - Conference contribution

AN - SCOPUS:85075244141

T3 - 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings

SP - 2027

EP - 2028

BT - 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019

Y2 - 7 July 2019 through 12 July 2019

ER -

Payne K, Lee JK, Xu K, Choi JH. Higher order plasma-based tunable absorber using magneto-dielectric substrates. In 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2019. p. 2027-2028. 8889341. (2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings). doi: 10.1109/APUSNCURSINRSM.2019.8889341

Higher order plasma-based tunable absorber using magneto-dielectric substrates

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this