Glycerol-derived magnetic mesoporous Fe/C composites for Cr(VI) removal, prepared via acid-assisted one-pot pyrolysis

Rapid increases in biodiesel use results in a surplus of its production by-product, glycerol, exceeding demand by traditional applications. In this study, Fe/C composites are prepared from glycerol-based precursors that include a dissolved iron salt via one-pot, two-stage pyrolysis. The first heating stage dehydrates, polymerizes, and carbonizes glycerol via acid-assisted pyrolysis while homogeneously dispersing a precipitated iron salt throughout the generated carbon matrix. The second stage develops porosity in the carbon support while reducing impregnated iron nanoparticles. Carbon supports with tailored physiochemical properties are generated by varying the dehydration acid (H₂SO₄ or H₃PO₄). Fe/C samples are predominantly mesoporous, with specific surface areas up to 560 m²/g and bulk iron contents up to 8.9 wt%, primarily as partially reduced Fe₃O₄. Cr(VI) removal follows the Freundlich model, reaching 107 mg/g at pH = 5. Mesoporous Fe/C composites are magnetic, allowing collection for reuse. After 4 use/recovery/reuse cycles, performance drops by < 25% when the products are applied in an actual wastewater system. Overall, the magnetic mesoporous Fe/C composite materials are straightforward to produce from waste glycerol and exhibit potential for environmental application in aqueous systems.