Digital Gothic Arch Tracing Device with Open-Source Software for CAD/CAM Denture Fabrication

Ahmet Orgev; Wei Shao Lin; Dean Morton

doi:10.11607/IJP.8251

Digital Gothic Arch Tracing Device with Open-Source Software for CAD/CAM Denture Fabrication

Ahmet Orgev
, Wei Shao Lin
, Dean Morton

Restorative Dentistry Administration

Indiana University-Purdue University Indianapolis

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

Digital or CAD/CAM workflows and protocols are being increasingly utilized because of their improved efficiency and reproducibility. For the fabrication of complete dentures, digital workflows can reduce treatment time and clinical visits while enhancing the reliability and reproducibility of the laboratory phase and materials. However, establishing centric relation (CR) and vertical dimension of occlusion (VDO) in a reproducible way is still a challenging step for complete denture fabrication in both analog and digital workflows. This clinical report describes a digital workflow using an individualized gothic arch tracing device (GATD) with open-source software for the fabrication of complete dentures. With this workflow, clinicians can offer customized solutions according to patient rehabilitation, with good reproducibility using gothic arch tracing to be implemented in the digital workflow. Int J Prosthodont 2024;37:103–108. doi: 10.11607/ijp.8251

Original language	English
Pages (from-to)	103-108
Number of pages	6
Journal	International Journal of Prosthodontics
Volume	37
Issue number	1
DOIs	https://doi.org/10.11607/IJP.8251
State	Published - 2024

Access to Document

10.11607/IJP.8251

Cite this

@article{1ca2cd56e82b4d1f8a4d8ced3a77ad9e,

title = "Digital Gothic Arch Tracing Device with Open-Source Software for CAD/CAM Denture Fabrication",

abstract = "Digital or CAD/CAM workflows and protocols are being increasingly utilized because of their improved efficiency and reproducibility. For the fabrication of complete dentures, digital workflows can reduce treatment time and clinical visits while enhancing the reliability and reproducibility of the laboratory phase and materials. However, establishing centric relation (CR) and vertical dimension of occlusion (VDO) in a reproducible way is still a challenging step for complete denture fabrication in both analog and digital workflows. This clinical report describes a digital workflow using an individualized gothic arch tracing device (GATD) with open-source software for the fabrication of complete dentures. With this workflow, clinicians can offer customized solutions according to patient rehabilitation, with good reproducibility using gothic arch tracing to be implemented in the digital workflow. Int J Prosthodont 2024;37:103–108. doi: 10.11607/ijp.8251",

author = "Ahmet Orgev and Lin, \{Wei Shao\} and Dean Morton",

note = "Publisher Copyright: {\textcopyright} (2024) QUINTESSENCE PUBLISHING CO, INC.",

year = "2024",

doi = "10.11607/IJP.8251",

language = "English",

volume = "37",

pages = "103--108",

journal = "International Journal of Prosthodontics",

issn = "0893-2174",

publisher = "Quintessence Publishing Co. Inc.",

number = "1",

}

TY - JOUR

T1 - Digital Gothic Arch Tracing Device with Open-Source Software for CAD/CAM Denture Fabrication

AU - Orgev, Ahmet

AU - Lin, Wei Shao

AU - Morton, Dean

N1 - Publisher Copyright: © (2024) QUINTESSENCE PUBLISHING CO, INC.

PY - 2024

Y1 - 2024

N2 - Digital or CAD/CAM workflows and protocols are being increasingly utilized because of their improved efficiency and reproducibility. For the fabrication of complete dentures, digital workflows can reduce treatment time and clinical visits while enhancing the reliability and reproducibility of the laboratory phase and materials. However, establishing centric relation (CR) and vertical dimension of occlusion (VDO) in a reproducible way is still a challenging step for complete denture fabrication in both analog and digital workflows. This clinical report describes a digital workflow using an individualized gothic arch tracing device (GATD) with open-source software for the fabrication of complete dentures. With this workflow, clinicians can offer customized solutions according to patient rehabilitation, with good reproducibility using gothic arch tracing to be implemented in the digital workflow. Int J Prosthodont 2024;37:103–108. doi: 10.11607/ijp.8251

AB - Digital or CAD/CAM workflows and protocols are being increasingly utilized because of their improved efficiency and reproducibility. For the fabrication of complete dentures, digital workflows can reduce treatment time and clinical visits while enhancing the reliability and reproducibility of the laboratory phase and materials. However, establishing centric relation (CR) and vertical dimension of occlusion (VDO) in a reproducible way is still a challenging step for complete denture fabrication in both analog and digital workflows. This clinical report describes a digital workflow using an individualized gothic arch tracing device (GATD) with open-source software for the fabrication of complete dentures. With this workflow, clinicians can offer customized solutions according to patient rehabilitation, with good reproducibility using gothic arch tracing to be implemented in the digital workflow. Int J Prosthodont 2024;37:103–108. doi: 10.11607/ijp.8251

UR - https://www.scopus.com/pages/publications/85185721098

U2 - 10.11607/IJP.8251

DO - 10.11607/IJP.8251

M3 - Article

C2 - 36484672

AN - SCOPUS:85185721098

SN - 0893-2174

VL - 37

SP - 103

EP - 108

JO - International Journal of Prosthodontics

JF - International Journal of Prosthodontics

IS - 1

ER -

Digital Gothic Arch Tracing Device with Open-Source Software for CAD/CAM Denture Fabrication

Abstract

Access to Document

Other files and links

Fingerprint

Cite this