Correction factors in the determination of mean velocity of overland flow

The velocity of overland flow has been conventionally measured using tracers, but it is difficult to measure the mean flow velocity directly because the centroid of the tracer plume is not easily identified. Consequently, previous investigators have measured the velocity of the leading edge of the plume and multiplied it by a correction factor α to obtain an estimate of mean velocity. An alternative method is to measure the velocity of the peak concentration in the tracer plume and multiply this velocity by another correction factor β to estimate mean velocity. To investigate the controls of α and β and develop predictive models for these correction factors, 40 experiments were performed in a flume with a mobile sand bed. Multiple regression analyses reveal that both α and β vary inversely with slope and directly with Reynolds number. The derived regression equations may be used to calculate the mean velocity of other shallow overland flows, at least within the range of slope and Reynolds number for which the equations were developed. In the experiments, slope ranged from 2-7° to 10° and Reynolds number from 1900 to 12600.