Construction and commissioning of CMS CE prototype silicon modules

CMS HGCAL collaboration

doi:10.1088/1748-0221/16/04/T04002

Construction and commissioning of CMS CE prototype silicon modules

CMS HGCAL collaboration

Physics

Bogazici University
Georgian Technical University
National Central University
Joint Institute for Nuclear Research
Texas Tech University
CERN
University of Iowa
Carnegie Mellon University
Brown University
Fermi National Accelerator Laboratory
Cukurova University
Institute for Nuclear Research of the Russian Academy of Sciences
German Electron Synchrotron
University of Maryland, College Park
National Technical University of Athens
Laboratório de Instrumentação e Física Experimental de Partículas
Laboratoire Leprince-Ringuet
Indian Institute of Technology Madras
Austrian Academy of Sciences
CEA/Saclay
Northwestern University
SINP
Imperial College London
University of Rochester
University of Minnesota Twin Cities
University of California at Santa Barbara
IN2P3-CNRS

Research output: Contribution to journal › Article › peer-review

12 Scopus citations

Abstract

As part of its HL-LHC upgrade program, the CMS collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with ~30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1 cm2, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.

Original language	English
Article number	T04002
Journal	Journal of Instrumentation
Volume	16
Issue number	4
DOIs	https://doi.org/10.1088/1748-0221/16/04/T04002
State	Published - Apr 2021

Keywords

Calorimeters
Large detector systems for particle and astroparticle physics
Performance of high energy physics detectors
Si microstrip and pad detectors

Access to Document

10.1088/1748-0221/16/04/T04002

Cite this

@article{6c6dee56c0d74420b7d041cd0a081f4f,

title = "Construction and commissioning of CMS CE prototype silicon modules",

abstract = "As part of its HL-LHC upgrade program, the CMS collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with \textasciitilde{}30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1 cm2, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.",

keywords = "Calorimeters, Large detector systems for particle and astroparticle physics, Performance of high energy physics detectors, Si microstrip and pad detectors",

author = "\{CMS HGCAL collaboration\} and B. Acar and G. Adamov and C. Adloff and S. Afanasiev and N. Akchurin and B. Akg{\"u}n and M. Alhusseini and J. Alison and G. Altopp and M. Alyari and S. An and S. Anagul and I. Andreev and M. Andrews and P. Aspell and Atakisi, \{I. A.\} and O. Bach and A. Baden and G. Bakas and A. Bakshi and S. Banerjee and P. Bargassa and D. Barney and E. Becheva and P. Behera and A. Belloni and T. Bergauer and M. Besancon and S. Bhattacharya and S. Bhattacharya and D. Bhowmik and P. Bloch and A. Bodek and G. Bombardi and M. Bonanomi and A. Bonnemaison and S. Bonomally and J. Borg and F. Bouyjou and D. Braga and J. Brashear and E. Brondolin and P. Bryant and J. Bueghly and B. Bilki and B. Burkle and A. Butler-Nalin and S. Callier and D. Calvet and D. Yu",

note = "Publisher Copyright: {\textcopyright} 2021 CERN for the benefit of the CMS collaboration.",

year = "2021",

month = apr,

doi = "10.1088/1748-0221/16/04/T04002",

language = "English",

volume = "16",

journal = "Journal of Instrumentation",

issn = "1748-0221",

publisher = "Institute of Physics",

number = "4",

}

TY - JOUR

T1 - Construction and commissioning of CMS CE prototype silicon modules

AU - CMS HGCAL collaboration

AU - Acar, B.

AU - Adamov, G.

AU - Adloff, C.

AU - Afanasiev, S.

AU - Akchurin, N.

AU - Akgün, B.

AU - Alhusseini, M.

AU - Alison, J.

AU - Altopp, G.

AU - Alyari, M.

AU - An, S.

AU - Anagul, S.

AU - Andreev, I.

AU - Andrews, M.

AU - Aspell, P.

AU - Atakisi, I. A.

AU - Bach, O.

AU - Baden, A.

AU - Bakas, G.

AU - Bakshi, A.

AU - Banerjee, S.

AU - Bargassa, P.

AU - Barney, D.

AU - Becheva, E.

AU - Behera, P.

AU - Belloni, A.

AU - Bergauer, T.

AU - Besancon, M.

AU - Bhattacharya, S.

AU - Bhowmik, D.

AU - Bloch, P.

AU - Bodek, A.

AU - Bombardi, G.

AU - Bonanomi, M.

AU - Bonnemaison, A.

AU - Bonomally, S.

AU - Borg, J.

AU - Bouyjou, F.

AU - Braga, D.

AU - Brashear, J.

AU - Brondolin, E.

AU - Bryant, P.

AU - Bueghly, J.

AU - Bilki, B.

AU - Burkle, B.

AU - Butler-Nalin, A.

AU - Callier, S.

AU - Calvet, D.

AU - Yu, D.

PY - 2021/4

Y1 - 2021/4

N2 - As part of its HL-LHC upgrade program, the CMS collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with ~30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1 cm2, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.

AB - As part of its HL-LHC upgrade program, the CMS collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with ~30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1 cm2, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.

KW - Calorimeters

KW - Large detector systems for particle and astroparticle physics

KW - Performance of high energy physics detectors

KW - Si microstrip and pad detectors

UR - https://www.scopus.com/pages/publications/85105700980

U2 - 10.1088/1748-0221/16/04/T04002

DO - 10.1088/1748-0221/16/04/T04002

M3 - Article

AN - SCOPUS:85105700980

SN - 1748-0221

VL - 16

JO - Journal of Instrumentation

JF - Journal of Instrumentation

IS - 4

M1 - T04002

ER -

Construction and commissioning of CMS CE prototype silicon modules

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this