TY - GEN
T1 - Conceptual design & prototype development of a solar-powered ground robot for energy-autonomous operation
AU - Behjat, Amir
AU - Chidambaran, Sharat
AU - Collins, Leighton
AU - Dhameliya, Maulikkumar
AU - Hoffman, Andrew
AU - Chowdhury, Souma
N1 - Publisher Copyright:
Copyright © 2019 ASME.
PY - 2019
Y1 - 2019
N2 - This paper presents the conceptual design and fabrication/assembly of an autonomous solar powered small unmanned ground vehicle (UGV) platform for operation in outdoor environments. The contribution lies in the ability of the proposed design to offer uninterrupted operation in terms of endurance, to facilitate educational and research applications that are otherwise challenging to perform with a typical UGV (that needs significant downtime for recharging). A high incident area for solar PV panels is required to be able to support the complete energy needs of a ∼ 46 lb UGV (i.e., fully recharge the suitably sized battery powering the UGV). This makes it challenging to develop a stable platform that can carry solar panels much larger than the surface area of the platform itself (an aspect receiving minimal attention in other similar purpose platforms). To address this challenge, a novel umbrella-like folding mechanism is conceived, designed and successfully incorporated in the baseline prototype. This mechanism allows incorporating a remarkable ~1 sq.m of incident solar PV with a net rated capacity of 200 W, one that remains folded to facilitate mobility, and can open/unfold to different extents for energy capture when needed. At the same time, the proposed design facilitates static and dynamic stability in spite of the significant solar PV incorporation. With the reference of the baseline prototype, an optimization approach is taken to develop a conceptual design of the next generation of this solar UGV. Specifically, the incident angle of the solar panels (enabled by the umbrella mechanism) at complete-open stage and the dimensions of the mechanism links and associated supports are separately optimized to respectively maximize the energy capture and the range of the UGV (assuming operation in Buffalo, NY), subject to stability and nominal velocity (of 2km/hr) constraints. The optimum design is found to provide an estimated range of 19.8 km/day.
AB - This paper presents the conceptual design and fabrication/assembly of an autonomous solar powered small unmanned ground vehicle (UGV) platform for operation in outdoor environments. The contribution lies in the ability of the proposed design to offer uninterrupted operation in terms of endurance, to facilitate educational and research applications that are otherwise challenging to perform with a typical UGV (that needs significant downtime for recharging). A high incident area for solar PV panels is required to be able to support the complete energy needs of a ∼ 46 lb UGV (i.e., fully recharge the suitably sized battery powering the UGV). This makes it challenging to develop a stable platform that can carry solar panels much larger than the surface area of the platform itself (an aspect receiving minimal attention in other similar purpose platforms). To address this challenge, a novel umbrella-like folding mechanism is conceived, designed and successfully incorporated in the baseline prototype. This mechanism allows incorporating a remarkable ~1 sq.m of incident solar PV with a net rated capacity of 200 W, one that remains folded to facilitate mobility, and can open/unfold to different extents for energy capture when needed. At the same time, the proposed design facilitates static and dynamic stability in spite of the significant solar PV incorporation. With the reference of the baseline prototype, an optimization approach is taken to develop a conceptual design of the next generation of this solar UGV. Specifically, the incident angle of the solar panels (enabled by the umbrella mechanism) at complete-open stage and the dimensions of the mechanism links and associated supports are separately optimized to respectively maximize the energy capture and the range of the UGV (assuming operation in Buffalo, NY), subject to stability and nominal velocity (of 2km/hr) constraints. The optimum design is found to provide an estimated range of 19.8 km/day.
UR - https://www.scopus.com/pages/publications/85076483960
U2 - 10.1115/DETC2019-98361
DO - 10.1115/DETC2019-98361
M3 - Conference contribution
AN - SCOPUS:85076483960
T3 - Proceedings of the ASME Design Engineering Technical Conference
BT - 43rd Mechanisms and Robotics Conference
PB - American Society of Mechanical Engineers (ASME)
T2 - ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2019
Y2 - 18 August 2019 through 21 August 2019
ER -