A two surface plasticity model for the simulation of uniaxial ratchetting response

In this study, a two surface plasticity model was developed and used to simulate the uniaxial ratchetting response of CS 1026 steel. Most cyclic plasticity models used in ratchetting simulations are Chaboche-type nonlinear kinematic hardening models, which deal with dynamic recovery terms considering the back stress tensor. This paper describes the ratchetting simulation of steel by the two surface model based on yield theory following both isotropic and kinematic hardening rules in order to obtain enhanced ratchetting response. The parameters used in the simulation were obtained from a parametric study and were determined from the initial range and stabilized range of CS 1026 steel. In addition, the two surface model was validated by comparing the results of a ratchetting simulation with experimentally determined maximum axial strain per cycle. The ratchetting responses obtained from the two surface model are an improved simulation results compared with results from bilinear and kinematic hardening models.